What Tools Do I Need To Change A Car Battery

To modify the battery in your car, you must have a 10mm open-end wrench.  The battery cables always employ 10mm basics. The battery bracket typically uses a 10mm bolt, just some battery brackets are held in place with a 12mm or 13mm bolt.

To change the battery like a professional person, yous may need a few extra tools.

With these tools, yous tin can change the battery in nearly any car. Of class, in that location are a few cars out there that need specialty tools.

Now let's wait more in-depth at the tools that you lot need to replace a auto battery yourself.

How to use these tools

Let'due south take a look at how yous would use these tools to change a car battery.

Battery Terminal Brush

You will demand a battery concluding castor to scrub the corroded battery concluding. Just insert the brush and twist the make clean your battery positive and negative clamps.

Brand sure to clean the battery mail besides.

10 mm Combination Wrench or Socket

Before you can remove the bombardment and clean it, you need to loosen the 10 mm nut. The nut doesn't demand to come off; you need to get it loose. Once you loosen the 10 mm bolt on the negative and positive battery bracket, you lot can remove the bombardment clamps.

You tin also use a combination 10mm open-end wrench to loosen the bolt.

Tools to remove battery subclass

Depending on how your battery is mounted, y'all may need one of the post-obit:

Removing batteries that accept the bracket on height

Most Japanese cars such as Honda Toyota or American cars such as Ford, Chevrolet, Dodge have the battery secured with a bracket on top of the bombardment. These batteries are like shooting fish in a barrel to replace. Remove the 10 mm that holds the subclass in place. Remove the bracket and pull out the battery.

Removing batteries that have a side bracket

In many European cars such as BMW, Mercedes, Audi, Porsche, the battery is held in identify with a bracket at the lesser of the battery. The bolt for the bracket is typically either a 12mm or 13mm bolt. You volition need an 8" extension and a ratchet to get to this bolt, which is down, and ordinarily, there isn't much room for your hands.

Dielectric Grease

It is highly recommended to use dielectric grease to protect the battery terminal from corrosion and improve the connection.

Where is a machine bombardment located?

The most common locations where you volition find a car battery are:

• The engine bay
• In the trunk
• Under the rear seat

When replacing a automobile battery, which concluding do you lot disconnect and connect commencement?

When removing the bombardment, start past disconnecting the negative terminal first. Then disconnect the positive battery last.
When connecting the bombardment, connect the positive terminal start. Lastly, connect the negative battery terminal.

How difficult is it to change the car battery yourself?

Changing a car battery is relatively like shooting fish in a barrel. Change the auto battery is straightforward even if you don't have much experience fixing cars; it is definitively one of the easiest repairs you can do yourself.

How long does it take to change the battery yourself?

On average, it takes nearly 15-25 minutes to charge a car bombardment.

What should I keep in heed when changing the car bombardment myself?

Always disconnect the negative terminal first. Never curt betwixt the positive battery terminal and the car'south trunk or the Negative last. You will create sparks and may even damage electronics or the battery if you do this. Well-nigh importantly, you may cause injuries to yourself.

Can I supplant the battery for free?

Yes. Most stores that sell batteries volition install information technology free of charge. Advance Car Parts and Autozone, for example, volition install the battery for gratuitous if you buy the new battery from them.

Source: https://www.youcanic.com/article/tools-do-need-change-a-car-battery

Posted by: baileypludenis.blogspot.com

Share this post